How To Shock A Hot Tub With Bromine. But for it to be effective, there needs to be a good level of bromide ions in the water, also known as a bromide bank. While it may not be fun to think about maintenance, it goes a long way.
Using a bromide booster product will ensure that the disinfection of the spa or hot tub water is completely bromine based and will eliminate the harsh chlorine odors. The hot tub should not be open for more than a few minutes. How to shock a hot tub with bromine.
Table of Contents
This Will Allow The Shock To Begin To Dissipate.
After some minutes, test the water to see if the chlorine level has dipped down to 5ppm. A hot tub shock is an oxidizer that activates bromide ions in the hot tub water with spa shock and converts them to hypobromous acid, the killing form of bromine. For a 300 gallon spa, 0.7 oz of chlorine granules shaken over the water surface, will raise the chlorine level up to about 10 ppm.
Hot Tubs Are Incubators For Harmful Bacteria And Shocking It Regularly Will Help You To Keep It Free From Them.
It all depends on the amount of shock used. For 3mg/l add 12g per 1500 litres. The hot tub should not be open for more than a few minutes.
How To Use Bromine In Hot Tubs.
This chemical is diluted so that it doesn’t bleach the water. The same treatment is required whenever the spa is drained and refilled. The bromide is converted to the bromine sanitizer upon addition of shock or oxidizer.
Whenever You Shock Your Spa, You Need To Wait For The Bromine Levels To Drop Before Using It.
Shocking involves using a concentrated dose of chemicals to increase the available free chlorine or bromine in your. The addition of bromine will depend upon usage and bathing habits. Keep the spa cover open or removed for about 30 minutes after.
While It May Not Be Fun To Think About Maintenance, It Goes A Long Way.
How frequently you need to add bromine will depend on your usage and bathing habits. Chlorine is the most common hot tub sanitizer. If it has, then you are free to use your tub.